L 15.5cm x H 17.5cm x W 7.5cm Introducing our Exterior Dentil House Moulding | TF06 - the epitome of architectural sophistication for your exterior. The TF06 external dentil is a meticulously designed dentil block, typically used as a "hit and miss" detail on larger dwellings with a minimum soffit size of 200mm or more. This exquisite dentil is often installed at eaves level, especially on luxury homes built to emulate the timeless Victorian detailing. To achieve the desired aesthetic balance, these dentils are typically installed with the 155mm section against the wall and the 175mm length projecting along the underside of the soffit. They can be spaced at 600mm centers, but are most frequently fitted in a "hit and miss" pattern. In practical terms, this means that most applications will require 16 dentils for every 5 meters of soffit. For the best architectural impact, we recommend using the TF06 dentil on soffit sizes of around 250mm or more. Installation: Use nails or screws during installation. Each dentil should be fixed from above by two suitable screws (not supplied) prior to the roof being felt and battened. Retro-fitting on property refurbishments can be achieved. Elevate your exterior design effortlessly and capture the timeless charm of architectural details inspired by the Victorian era.

Last updated: 22/07/25

Pattern

Architectural

block