Product information
Volden Contact Adhesive Gel is a universal, toluene free, solvented ready to use tixotropic contact adhesive based upon rubber and synthetic resins.

Guarantee - Statutory
Suitable for Cork, felt, laminate, leather, MDF, metal, PVC, rubber, stone, plastics except polystyrene (PS) PE, PP, PTFE
Resistant to moisture & water
12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°C
Apply an even coat of the adhesive with a brush onto both surfaces to be bonded together. Wait for 10 minutes, then align the surfaces carefully and join both parts together. Push firmly from the centre outwards to remove any air pockets. Note: Adhesive is water resistant, but not suitable for water immersion.
Danger Contains: ethyl acetate, acetone, Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane, cyclohexane, butanone. Highly flammable liquid and vapour. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing vapours, mist. Wash hands, forearms and face thoroughly after handling. Use only outdoors or in a well-ventilated area.
Features and benefits
Water Resistant
Adhesive is water resistant, but not suitable for water immersion. This product is not to be used for carpet laying
Fast drying, high adhesive strength, moisture resistant
Bonding of many materials such as rubber, leather, cork, plastic, felt, etc. on various types of substrates or among themselves. Also bonding of synthetic decoration panels and worktops in wood, metal or board
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

Last updated: 03/03/23

cork

exterior

felt